For the safety and security of the home and business, the alarm system is a must. If your alarm system has become old and outdated, you must upgrade them. When you use a new and advanced alarm system, you may be able to utilise new features. Regardless of the reason for changing the alarm system, you can carefully consider it to make the final decision. However, you must remove the old alarm system first and install new alarm systems in Brisbane.
From the expert professionals, you may be able to learn how to remove the old system and upgrade it with the existing setup.
Steps to Remove Old Alarm System
Time and patience are necessary to remove the old alarm systems. Here are the steps you must follow.
Step 1: Check the Alarm Components That Should be Removed
When replacing the alarm system, you can use the existing setup. Therefore, it may become essential to decide what you should keep and remove from the location. It is better to eliminate the components that may impact the new alarm system. Components creating clutter and visual interference must be removed from the area.
If you have a new system, you may get modest and sleek designs that do not appear unobtrusive. The old system should not interfere with the process. If you leave these unnecessary old components in place, the location may seem cluttered.
Some of the components have to be removed, but some of them can stay in place. During the installation process, the old wiring of the alarm systems in Brisbane can remain in place if it is in good condition. If you do not have any experience with the electrical work and installation process, it is better to contact professionals for a safe and smooth service.
Step 2: Avoid False Alarm Notifying the Alarm Company
Before making changes to the existing alarm system, you must inform the alarm service provider. If you let the professionals know about the upgrade, you may be able to avoid issues related to the false alarm. Police may not come to the location.
If the alarm system is inactive, you must also inform the provider. Similar measures must be taken when you cancel the contract. Otherwise, the professionals may be monitoring the alarm system. When you disconnect or cut the wires, the service provider may get an alert immediately.
Step 3: Put the Alarm System in the Maintenance Mode
Using the control panel, you can turn off the alarm systems in Brisbane. However, you can also turn the alarm on in maintenance mode when upgrading or replacing them. This way, you can ensure that the alarm system is not tampered with.
Some of the alarm systems also come with backup batteries. It usually becomes active if there is an issue with the main power supply. So, you may be required to eliminate the backup function so there is no siren from the alarm system.
Step 4: Disconnect the Siren
Even if the alarm system is no longer attached to the monitoring system, an internal alarm can still get triggered. It is better to discard the security siren so it does not get turned on naturally. In some units, you can find separate circuits for the siren. It is usually kept in a separate location to eliminate the chances of cutting the power of the primary system. While disconnecting the siren, you must follow proper procedure.
Step 5: Disconnect the Power Supply to Avoid Injuries
Professionals generally discard power supply to eliminate the chances of accidents. The opportunity of electrocution can be avoided through the process. It is better to upgrade the system only when everything is disconnected. By detaching the power supply, you may decrease injury and accidents.
Step 6: Take off the Old Control
Before installing a new alarm system, you must remove the old control panel and other components.
Step 7: Install New Security System
After removing the old system, you can replace it with a new one. Check if you need any additional components. Now, you can go ahead with the installation process.
Don’t you have time, knowledge, or experience installing alarm systems in Brisbane? Contact the professionals from 1300 Cameras to help you with the installation process.
